ANALISIS UPAYA PENGGUNAAN SISTEM KOMPUTER DI KALANGAN KARYAWAN DENGAN MODEL UNIFIED THEORY OF ACCEPTANCE AND USE OF TECHNOLOGY
Abstract
In the era of Industry 4.0, computer technology has become crucial in completing tasks with efficiency, accuracy, and cost savings. However, in the Papua Highlands Province, understanding and utilizing this technology still pose challenges, affecting organizational productivity. This study employs a modified UTAUT model to analyze the factors influencing the intention to learn and use computers at STIMIK Agamua Wamena. With a sample of 100 part-time students from remote areas (3T), questionnaires were distributed and analyzed using the statistical method of Smart PLS. The results indicate that working condition facilities, complexity of computer use, social factors, and efforts in information technology adaptation positively influence the intention to learn and the behavior of computer use. Practical recommendations include enhancing computer education and training for employees, aiming to improve organizational performance and efficiency.
Keywords
Full Text:
PDFReferences
J. de A. Dornelles, N. F. Ayala, and A. G. Frank, “Smart Working in Industry 4.0: How digital technologies enhance manufacturing workers’ activities,” Comput. Ind. Eng., 2022, doi: 10.1016/j.cie.2021.107804.
N. S. Valeyeva, R. V. Kupriyanov, E. Valeeva, and N. V. Kraysman, “Influence of the Fourth Industrial Revolution (Industry 4.0) on the System of the Engineering Education,” in Advances in Intelligent Systems and Computing, 2020. doi: 10.1007/978-3-030-40271-6_32.
P. López-Igual and P. Rodríguez-Modroño, “Who is teleworking and where from? Exploring the main determinants of telework in Europe,” Sustain., 2020, doi: 10.3390/su12218797.
Y. P. Sari and R. Ali, “Implementasi Sistem Pelaporan Sarana Dan Prasarana Kegiatan Belajar Mengajar Berbasis Android (Studi Kasus : Institut Informatika Dan Bisnis Darmajaya),” J. Inform. Darmajaya, vol. 19, no. 1, pp. 47–53, 2019, doi: 10.30873/ji.v19i1.1500.
F. P. Eka Putra, M. U. Mansyur, K. Z. Imam, and S. Katsir, “Optimalisasi Pengembangan Sistem Informasi Laboratorium Terintegerasi Sistem Akademik Menggunakan Metode Scrumb,” J. Inform. Darmajaya, vol. 23, no. 2, pp. 183–198, 2023, doi: 10.30873/ji.v23i2.3749.
S. S. Chaurasia, N. Kaul, B. Yadav, and D. Shukla, “Open innovation for sustainability through creating shared value-role of knowledge management system, openness and organizational structure,” J. Knowl. Manag., 2020, doi: 10.1108/JKM-04-2020-0319.
J. Gea and Y. A. Susetyo, “Implementasi Framework Flask Pada Modul Beta-App Pada Aplikasi Sistem Informasi Helpdesk (Sih) Studi Kasus Pt XYZ,” J. Inform., vol. 23, no. 2, pp. 243–258, 2023, doi: 10.30873/ji.v23i2.3673.
A. Kuek and S. Hakkennes, “Healthcare staff digital literacy levels and their attitudes towards information systems,” Health Informatics J., 2020, doi: 10.1177/1460458219839613.
A. Donmez-Turan, “Does unified theory of acceptance and use of technology (UTAUT) reduce resistance and anxiety of individuals towards a new system?,” Kybernetes, 2020, doi: 10.1108/K-08-2018-0450.
Z. Fauzan and A. Baijuri, “SISTEM PENDUKUNG KEPUTUSAN UNTUK PENILAIAN KINERJA GURU SMA NEGERI 1 SUKOSARI MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING (SAW),” J. Inform. Darmajaya, vol. 23, no. 2, pp. 169–182, 2023.
J. Creswell, Reseach Design: Qualitative, Quantitative, and Mixed Method Approaches. California: Sage Publications, 2018.
A. L. S. Leung, C. Yeung, S. Chu, A. W. Y. Wong, O. Y. Yu, and C. H. Chu, “Use of computer simulation in dental training with special reference to simodont,” Dent. J., 2021, doi: 10.3390/dj9110125.
A. McIlwraith, Information security and employee behaviour: How to reduce risk through employee education, training and awareness. 2021. doi: 10.4324/9780429281785.
C. Xu and M. Deng, “Waveform correlation factor (WCF) weighted TFM imaging for Lamb wave phased array,” NDT E Int., 2022, doi: 10.1016/j.ndteint.2022.102647.
W. M. Al-Rahmi et al., “Integrating Technology Acceptance Model with Innovation Diffusion Theory: An Empirical Investigation on Students’ Intention to Use E-Learning Systems,” IEEE Access, 2019, doi: 10.1109/ACCESS.2019.2899368.
D. Umuhoza, F. Yang, D. Long, Z. Hao, J. Dai, and A. Zhao, “Strategies for Tuning the Biodegradation of Silk Fibroin-Based Materials for Tissue Engineering Applications,” ACS Biomaterials Science and Engineering. 2020. doi: 10.1021/acsbiomaterials.9b01781.
C. Niesel and A. Nili, “Older professionals’ adaptation to new information technologies: A study in the context of non-standard employment,” in Proceedings of the Annual Hawaii International Conference on System Sciences, 2021. doi: 10.24251/hicss.2021.573.
S. Maheshwari, P. Gautam, and C. K. Jaggi, “Role of Big Data Analytics in supply chain management: current trends and future perspectives,” International Journal of Production Research. 2021. doi: 10.1080/00207543.2020.1793011.
N. H. Tien, “Comparative analysis of advantages and disadvantages of the modes of entrying the international market,” Int. J. Adv. Res. Eng. Manag., 2020.
M. P. Sari, D. M. Efendi, A. Afandi, S. H. Lubis, and H. Afandi, “Audit Sistem Informasi Akademi Kebidanan Ar-Rahma Menggunakan Framework Cobit 5,” J. Inform. Darmajaya, vol. 9, no. 3, pp. 265–272, 2023, doi: 10.33795/jip.v9i3.876.
DOI: https://doi.org/10.30873/ji.v24i1.4039
Jurnal Informatika is abstracting and indexing in the following databases:
_(1).png)
JURNAL INFORMATIKA
Dikelola Oleh: Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM)
Diterbitkan Oleh: Institut Informatika dan Bisnis Darmajaya
Alamat: Jl. Z.A. Pagar Alam No. 93 Gedong Meneng, Bandar Lampung Lampung
Website: jurnal.darmajaya.ac.id
Email: lp4mjurin@gmail.com
Jurnal Informatika is licensed under a Creative Commons Attribution 4.0 International License.